汪正祺 特聘教授/國際事務處副處長

姓名職稱： 汪正祺 特聘教授

電子郵件：wcc@ncut.edu.tw

研究室：非線性系統整合實驗室

電話：04-23924505 ext.5163

傳真：04-23930681

實驗室：非線性系統整合實驗室

研究領域：

精密機械軸承系統、非線性控制系統、機械系統智慧化、專利工程

教學課程：

機械振動與量測、感測與量測、智慧製造

                                                                                                                                  

個人簡歷：

  1. 學歷：國立成功大學機械工程研究所博士
  2. 經歷：
  • 國立勤益科技大學精密製造科技研究所博士班所長
  • 國立勤益科技大學研究發展處研發長
  • Smart Science, Editor in Chief
  • 勞動部勞動力發展署-熱處理職類術科測試監評人員
  • 台灣智能儀器發明學會副理事長
  1. 榮譽：
  • 民國106至108年度榮膺國立勤益科大學特聘教授。
  • 民國102至108年度榮獲國立勤益科大學推動研究發展績優獎。
  • 民國104年度起獲科技部獎勵特殊優秀人才之獎助。
  • Best Conference Paper Award in 2nd IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability 2020.
  • 2018年5月30日，單機設備或單元智能控制系統先進技術及加值軟體研發，獲科技部工程技術研究發展司-第一年專案計畫研發成果績效優良獎。
  • 2016年4月26日，升壓切換式電源供應器研製，獲中區技專校院校繼聯盟-2016年研發成果網路聯合發表會作品競賽佳作。
  • 2016年4月26日，滾珠螺桿振動量測之研究，獲中區技專校院校繼聯盟-2016年研發成果網路聯合發表會作品競賽佳作。
  • 2015年11月28日，高速主軸創新應用實作類，獲SPINTECH Technology Thesis Awards 優等獎。
  • 2015年12月19日獲2015亞洲機器人運動競技大賽A組自走車項目第六名及佳作。
  • 2014年12月20日獲2014亞洲機器人運動競技大賽A組自走車項目第三名及佳作。
  • 2014年8月1日，智慧型嵌入式充電控制之太陽能追日系統研究，獲東元科技創意競賽「Green Tech」入圍主競賽決賽。
  • 2013年12月，2013中台灣創新研發競賽，工具機類第二名、綠能科技類佳作。
  • 2013年5月9-11日，高效節能蔬果乾燥設備與應用，榮獲馬來西亞國際發明展金牌獎。
  • 2012年11月29日-12月1日，對異極性及異相成分之萃取純化裝置，榮獲韓國首爾國際發明展金牌獎及大會發明首獎。
  • 2012年11月19-22日，萃取相異極性成分之裝置，榮獲科威特中東國際發明展金牌獎。
  • 2012年11月19-22日，具有控溫控頻功能之震盪式容器，榮獲科威特中東國際發明展銀牌獎。
  • 2012年6月13-15日，超音波節能萃取設備，榮獲美國匹茲堡國際發明展金牌獎。
  • 2012年5月17-19日，創新高效超音波純化設備，榮獲馬來西亞國際發明展金牌獎。
  • 2012年5月17-19日，超臨界分餾法，獲馬來西亞國際發明展銀牌獎。
  • 2012年4月，台灣智慧型機器人大賽，優勝獎。
  • 2011年9月29日，調理咖啡之方法及裝置，榮獲台北國際發明展銀牌獎。
  • 2011年9月29日，自然對流之節能乾燥機，榮獲台北國際發明展銀牌獎。
  • 2011年6月15-17日，高效節能食品乾燥機，榮獲美國匹茲堡國際發明展銀牌獎。
  • 2011年6月15-17日，連續吸水用具，榮獲美國匹茲堡國際發明展銀牌獎。
  • 2011年4月8日，新型多功能飲品沖泡器，榮獲日內瓦國際發明展銀牌獎。
  • 2010年10月30日，高效節能食品乾燥機，榮獲第61屆德國紐倫堡國際發明展銀牌獎。
  • 2010年10月14-16日，可調控咖啡因濃度的新型咖啡機，榮獲2010年英國倫敦國際發明展金牌獎。
  • 2010年10月2日，高爾夫球桿之揮擊動態測量裝置及方法，榮獲台北國際發明暨技術交易展銅牌獎。
  • 2010年4月29日-5月9日，超臨界低溫萃取分離技術之應用，榮獲法國巴黎國際發明展特別獎。
  • 2010年6月5日，指導學生以「高爾夫球桿MOI測量儀」參加「99年度全國技專校院學生實務專題製作競賽暨成果展活動」，於機械與動力機械群榮獲佳作。
  • 2010年5月14-16日，頂級蜂膠-超臨界流體技術在食品之應用，榮獲2010年馬來西亞國際發明展銀牌獎。
  • 2010年12月6日，自走車撞球，99學年度台灣區電腦化運動競技大賽佳作。
  • 2009年11月6日，製作咖啡飲品新方法之研究，榮獲2009南區技專校院師生產學合作實務專題製作競賽佳作。
  • 2009年11月7日，超臨界溶液快速膨脹分離技術，榮獲第60屆德國紐倫堡國際發明展金牌獎。
  • 2009年10月16日，液體濃度量測器，榮獲2009年英國倫敦國際發明展銀牌獎及一面特別獎。
  • 2009年5月15-17日，光學式酒精濃度量測技術，獲2009年馬來西亞發明展銅牌獎、特別獎。
  • 2009年9月26日，利用剪力效應與震動力進行萃取之方法，榮獲2009年台北國際發明暨技術交易展銅牌獎。
  • 2008年10月，可調控咖啡因濃度的新型咖啡機，榮獲第60屆德國紐倫堡國際發明展銀牌獎；同時，2009年4月，榮獲第37屆瑞士日內瓦國際發明展銀牌獎。
  • 2008年10月，高爾夫球桿抗彎強度測量儀，榮獲2008年台北國際發明展銅牌獎。
  • 2008年6月，電子式高球桿揮擊動態測量儀，榮獲2008年第24屆美國匹茲堡國際發明展金牌獎。
  • 2008年6月，電子式高球桿揮擊動態測量儀，榮獲2008年韓國發明協會頒發榮譽特別獎。
  • 2008年6月，可調控咖啡因之新型咖啡機，榮獲2008年第24屆美國匹茲堡國際發明展一面金牌及一面銀牌獎（食品/飲品類）。
  • 2008年1月，高爾夫球桿抗彎強度測量儀，榮獲台北市政府頒發榮譽獎狀一紙並獲市長接見表揚。
  • 2007年10月，高爾夫球桿抗彎強度測量儀，榮獲英國倫敦國際發明展及年度發明獎雙金牌。
  • 2007年7月，可調式高爾夫球桿角度測量儀，榮獲考試院頒發『台灣之光』獎狀一紙並獲院長接見表揚。
  • 2007年4月，可調式高爾夫球桿角度測量儀，榮獲第35屆瑞士日內瓦國際發明展銀牌獎。
  • 2006年11月，可攜式高爾夫球桿頻率分析儀，獲第58屆德國紐倫堡發明展金牌獎。

研究計畫：

[1].科技部研究計畫

  • 可撓性薄片動壓氣浮軸承系統之性能分析與控制(MOST 108-2221-E-167-004),主持人,2019.08.01 ~ 2020.07.31,科技部
  • 國產車床工具機主軸周邊智能化機能技術開發 (2/2)(MOST  108-2218-E-167-001-),共同主持人,2019.08.01 ~ 2020.07.31,科技部
  • 難削材加工技術產學聯盟(1/3),(MOST108-2622-8-167-002-TE3),共同主持人,2019.02.01 ~ 2020.01.31,科技部
  • 基於深度學習與雲端安全之智能化產線技術開發-以氣動夾爪產線為例 (1/3)( MOST 107-2218-E-167-004-),共同主持人,2018.12.01 ~ 2019.11.30,科技部
  • 基於分數階混沌Meta可拓類神經網路之虛擬量測技術於車床工具機智能化研究(MOST 107-2221-E-167 -026 -),主持,2018.08.01 ~ 2019.07.31,科技部
  • AI於智慧機台系統開發：Arvis專業助理、機台預診與精度維持(1/4) (MOST 107-2634-F-005 -001),共同主持人,2018.01.01 ~ 2018.12.31,科技部
  • 國產車床工具機主軸周邊智能化機能技術開發 (1/2) (MOST 107-2218-E-167 -001) ,共同主持人,2018.08.01 ~ 2019.07.31,科技部
  • 細縫式供氣軸承系統之動態特性分析與智慧化控制(MOST 106-2221-E-167 -012 -MY2),主持人,2017.08.01 ~ 2019.07.31,科技部
  • 加工與量測技術研發聯盟(1/3) (MOST 106-2622-8-167 -001 -TE3),主持人,2017.02.01 ~ 2018.01.31,科技部
  • 精密主軸於智慧型滾齒機之應用暨推廣(2/2)-深耕工業基礎技術專案計畫,(MOST 106-2218-E-035 -011),共同主持人,2017.10.01 ~ 2018.09.30,科技部
  • 國產車床工具機主軸周邊智能化機能技術開發(MOST 106-2218-E-167 -001 ),共同主持人,2017.05.01 ~ 2018.04.30,科技部
  • 智能化腔孔節流氣壓軸承系統之分析與開發,(MOST 105-2221-E-167 -010),主持人,2016.08.01 ~ 2017.07.31,科技部
  • 精密主軸於智慧型滾齒機之應用暨推廣(1/2)-深耕工業基礎技術專案計畫,(MOST 105-2221-E-167 -010),共同主持人,2016.10.01 ~ 2017.09.30,科技部
  • 多向支撐耦合型氣膜軸承系統之性能分析與開發,(MOST 104-2221-E-167 -014),主持人,2015.08.01 ~ 2016.07.31,科技部
  • 螺旋槽氣浮軸承系統之性能分析與混沌控制,(MOST 103-2221-E-167 -011),主持人,2014.08.01 ~ 2015.07.31,科技部
  • 複合式多孔質氣膜軸承系統之動態分析與控制,(NSC 102-2221-E-167 -035),主持人,2013.08.01 ~ 2014.07.31,國科會
  • 氣體浮環軸承系統之分析與控制(優秀年輕學者研究計畫NSC 100-2628-E-269-016-MY2),主持人,2011.08.01 ~ 2013.07.31,國科會
  • 超短型氣體軸承於微機電系統之動態分析、實驗與控制,(NSC 99-2221-E-269-008),主持人,2010.08.01 ~ 2011.07.31,國科會
  • 聯合型氣體軸承系統之非線性動態性能分析與控制,(NSC 98-2221-E-269-016),主持人,2009.08.01 ~ 2010.07.31,國科會
  • 太陽能電力系統最大功率追蹤控制與電力管理,(NSC 98-2221-E-269-019-MY2),共同主持人,2009.08.01 ~ 2011.07.31,國科會
  • 以混合法分析非圓形氣體軸承系統之動態性能,(NSC 97-2221-E-269 -022),主持人,2008.08.01 ~ 2009.07.31,國科會
  • 微型氣體軸承系統考慮滑動效應之預測分析、驗證與控制,(NSC 96-2221-E-269-009),主持人,2007.08.01 ~ 2008.07.31,國科會
  • 非線性空氣彈力系統之動態分析與控制,(NSC 96-2221-E-269-001),共同主持人,2007.08.01 ~ 2008.07.31,國科會
  • 球形氣體軸承系統之非線性動態特性分析、設計與試製(2/2),(NSC 95-2221-E-269-016)主持人,2006.08.01~2007.07.31,國科會
  • 球形氣體軸承系統之非線性動態特性分析、設計與試製(1/2),(NSC 94-2212-E-269-009),主持人,2005.08.01~2006.07.31,國科會
  • 動壓氣體軸承系統中撓性轉子之分岔動態特性分析,(NSC 92-2212-E-269-012),主持人,2003.08.01~2004.07.31,國科會

[2]. 科技部產學計畫

  • 智能化磨床加工優化分析與檢測技術開發(MOST 108-2622-E-167 -023 -CC3),主持人,2019.11.01 ~ 2020.10.31,科技部
  • 新型高穩定性氣潤軸承系統之設計與開發(MOST 108-2622-E-167-007-CC3),主持人,2019.06.01 ~ 2020.05.31,科技部
  • 具無線電能傳輸技術之超音波刀把套件開發(2/2) (MOST 108-2622-E-167 -025 -CC2) (產學合作研究計畫-開發型),共同主持人,2019.11.01~2020.10.31,科技部
  • 高精密球形多孔隙氣浮軸承系統之設計與開發  (MOST 107-2622-E-167 -002 -CC3),主持人,2018.06.01 ~ 2019.05.31,科技部
  • 具無線電能傳輸技術之超音波刀把套件開發(1/2) (MOST 107-2622-E-167 -022 -CC2) (產學合作研究計畫-開發型),共同主持人,2018.11.01~2019.10.31,科技部
  • 智慧型錐面氣壓軸承系統之最佳化設計與分析(MOST 106-2622-E-167 -010 -CC3),主持人,2017.06.01 ~ 2018.05.31,科技部
  • 主動式混合型動靜壓氣潤軸承系統之最佳化設計與研製,(MOST105-2622-E-167 -007 -CC3),主持人,2016.06.01~2017.05.31,科技部
  • 對置型高速氣體軸承系統之開發與研製,(MOST104-2622-E-167-006-CC3),主持人,2015.06.01~2016.05.31,科技部
  • 雙向具孔隙氣浮止推軸承系統之設計與開發,(MOST103-2622-E-167-015-CC3),主持人,2014.06.01~2015.05.31,科技部
  • 氣靜壓高速主軸系統之迴轉精度檢測與聲振耦合分析,(NSC102-2622-E-167 -013-CC3),主持人,2013.06.01~2014.05.31,國科會
  • 高效複合式超音波純化分離技術與設備之開發,(NSC101-2622-E-269-010 -CC3),主持人,2012.06.01~2013.05.31,國科會
  • 創新節能萃取技術應用於桑根皮之純化分析,(NSC 100-2622-E-269-004-CC3),主持人,2011.06.01~2012.05.31,國科會
  • 格柵板焊接機台之結構強度分析與設計,(NSC 100-2622-E-269-019-CC3),共同主持人,2011.11.01~2012.10.31,國科會
  • 創新安全工作服與測試平台之研發,(NSC 99-2622-E-269-010-CC3),主持人,2010.06.01~2011.05.31,國科會
  • 新型節能食品乾燥設備之研發(NSC 99-2622-E-269-019-CC3),共同主持人,2010.11.01 ~ 2011.10.31,國科會
  • 新型發酵槽系統之設計與研發,(NSC 98-2622-E-269-004-CC3),主持人,2009.07.01 ~ 2010.06.30,國科會
  • 電子式高球桿揮擊動態測量儀之設計與研發,(NSC 96-2622-E-269-021-CC3),主持人,2007.11.01 ~ 2008.10.31,國科會
  • 射出成型機噴嘴頭之電腦輔助設計與分析,(NSC 96-2622-E-269-024-CC3),共同主持人,2007.11.01 ~ 2008.10.31,國科會
  • 高爾夫球角度測量儀之設計與研發,(NSC 94-2622-E-269-039-CC3),主持人,2005.11.01~2006.10.31,國科會
  • 高爾夫球桿振動特性與分析設備之設計與開發,(NSC 93-2622-E-269-034-CC3),主持人,2004.11.01~2005.10.31,國科會

  [3]經濟部與教育部產學研究計畫

  • 108年度經濟部學界協助中小企業科技關懷計畫-精密機械產業鏈技術與創新研發提升計畫,共同主持人,2019.05.01~2019.10.31,經濟部
  • 107年度經濟部學界協助中小企業科技關懷計畫-精密機械產業鏈技術與創新研發提升計畫,共同主持人,2018.05.01~2018.10.31,經濟部
  • 106年度經濟部學界協助中小企業科技關懷計畫-精密機械產業鏈技術與創新研發提升計畫,共同主持人,2017.05.01~2017.10.31,經濟部
  • 大甲幼獅工業區廠商轉型再造計畫,共同主持人,2016.03.01~2016.12.31,經濟部
  • 大甲幼獅工業區廠商轉型再造計畫,共同主持人,2015.03.01~2015.12.31,經濟部
  • 大甲幼獅工業區廠商轉型再造計畫,共同主持人,2014.03.01~2014.12.31,經濟部
  • 高空作業背負式安全工作服開發計畫,主持人,2010.07.03~2011.04.30,經濟部
  • 98年度經濟部學界協助中小企業科技關懷計畫-高爾夫球具組客製化技術之開發,主持人,2009.01.01 ~ 2009.06.30,經濟部
  • 教育部推動技專校院與產業園區產學合作計畫-高爾夫球桿身脊線測量儀之設計與研發,主持人,2007.12.01 ~ 2008.8.31,教育部

[4] 企業與學校所簽訂之產學研究計畫

  • 工具機氣靜壓主軸技術開發,主持人,2018.06.15~2018.11.18,工研院
  • 面板級封裝介電層智能固化設備之強度與熱傳分析,主持人2017.10.26~2019.4.30,志聖工業股份有限公司
  • 技術服務案-軸承運轉穩定性分析,主持人,2017.06.01~2017.10.30,醫薔科儀有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31麥克機器實業有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31普森精密主軸工業有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31萬註機器廠股份有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31聯盛科技有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31譜威科技顧問股份有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31大光長榮機械股份有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31旭泰精密機械股份有限公司
  • 進駐聯盟服務計畫,主持人2017.02.01~2018.01.31玖鉦機械工業有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31,佰機實業股份有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31,盈錫精密工業股份有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31,高明鐵企業股份有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31,喬崴進科技股份有限公司
  • 進駐聯盟服務計畫,主持人,2017.02.01~2018.01.31,晁群有限公司
  • 工具機滑軌預壓及磨潤分析研究計畫,共同主持人,2016.10.01~2017.9.30,工研院
  • 喬崴進工具機人才培育及獎助學金計畫,共同主持人,2016.2.01~2017.1.31,喬崴進科技股份有限公司
  • 刀庫系統整合與開發主持人,2014.10.01~2015.9.30,北鉅精機股份有限公司
  • 提升水熱合成製程密封管理技術第二期計畫,共同主持人,2012.07.01~2012.12.31,希華晶體科技（股公司）南科分公司
  • 烘乾系統與控制模組之設計與製造(FEU-10010-11-53-001),主持人,2011.10.01~2012.03.31,金岳機械工程有限公司
  • 「低溫萃取分離設備與製程」研發與技術轉移計畫(FEU-9612-07-11-003),共同主持人,2009.11.01 ~ 2010.04.30,寶淨環保科技股份有限公司
  • 鋁製版式熱管之逆運算(FEU-9511-05-11-001),共同主持人,2006.11.1～2007.3.31,工研院
  • 霧化型均熱板之評估分析(FEU-9612-07-11-003),共同主持人,2007.12.1～2008.6.30,工研院
  • 開發滑軌拉力測試設備(FEU-9404-09-30-002),共同主持人,2005.4.1～2005.12.15,品峰工業股份有限公司
  • 開發滑軌壽命測試設備(FEU-9404-09-30-003),共同主持人, 2005.4.1～2005.12.15,品峰工業股份有限公司
  • 鉸鍊中板片彈簧之電腦輔助工程分析評估(FEU-9405-12-12-001),共同主持人,2005.5.1～2006.4.30,達理股份有限公司
  • 光電式應力感測器之研製(FEU-9407-12-15-001),共同主持人,2005.7.1～2006.6.30,阜拓科技有限公司

研究著作：

(A)期刊論文：（*為聯絡作者）

  1. *Cheng-Chi Wang and Cha’o-Kuang Chen, 2001/10, Bifurcation Analysis of Self-Acting Gas Journal Bearings, Journal of Tribology-Transactions of the ASME, Vol.123(issue4), pp.755-768. (SCI, Impact Factor : 1.787; 61/128, Engineering, Mechanical) [ISSN: 0742-4787] (NSC 88-2212-E-006-039) (26/1, cited/self)
  2. *Cheng-Chi Wang, Cheng-Ying Lo and Cha’o-Kuang Chen, 2002/7, Nonlinear Dynamic Analysis of a Flexible Rotor Supported by Externally Pressurized Porous Gas Journal Bearings, Journal of Tribology-Transactions of the ASME, Vol.124(issue3), pp.553-561. (SCI, Impact Factor : 1.787; 61/128, Engineering, Mechanical) [ISSN: 0742-4787] (NSC 88-2212-E-006-039) (13/3, cited/self)
  3. *Cheng-Chi Wang and Cheng-Ying Lo, 2003/4, Thermal Stress Analysis of Semiconductor Wafers in Rapid Thermal Processing, Journal of the Chinese Society of Mechanical Engineers, Vol.24(issue2), pp.127-137. (SCI, Impact Factor : 0.112; 126/128, Engineering, Mechanical) [ISSN: 0257-9731] (NSC 89-2212-E-150-038) (0/0, cited/self)
  4. *Cheng-Chi Wang and Chen Cha’o-Kuang, 2003/12/1, Bifurcation Analysis of Externally Pressurized Porous Gas Journal Bearings, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.217(issue12), pp.1325-1338. (SCI, Impact Factor : 0.996; 99/128, Engineering, Mechanical) [ISSN: 0954-4062] (NSC 88-2212-E-006-039) (2/0, cited/self)
  5. Jiun-Shen Wang, *Cheng-Chi Wang and Jiin-Hong Lin, 2004/11, Inverse Estimation of Local Heat Transfer Coefficient in a Vertical Plate Fin in Micropolar Fluid Flow, Journal of the Chinese Society of Mechanical Engineers, Vol.25, pp.313-320. (SCI, Impact Factor : 0.112; 126/128, Engineering, Mechanical) [ISSN: 0257-9731] (NSC-92-2212-E-269-012) (0/0, cited/self)
  6. *Cheng-Chi Wang and Jiun-Shen Wang, 2004/11, Analysis of Herringbone-Grooved Gas Journal-Bearing System, Journal of the Chinese Society of Mechanical Engineers, Vol.25, pp.189-197. (SCI, Impact Factor : 0.112; 126/128, Engineering, Mechanical) [ISSN: 0257-9731] (NSC92-2212-E-269-012) (0/0, cited/self)
  7. *Cheng-Chi Wang, Ming-Jyi Jang and Cha’o-Kuang Chen, 2004/12, Non-linear Dynamic Analysis of a Flexible Rotor Supported by Self-Acting Gas Journal Bearings, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.218(issue12), pp.1527-1538. (SCI, Impact Factor : 0.996; 99/128, Engineering, Mechanical) [ISSN: 0954-4062]  (NSC 88-2212-E-006-039) (6/0, cited/self)
  8. Cheng-Ying Lo, *Cheng-Chi Wang and Yu-Han Lee, 2005/1, Performance Analysis of High-Speed Spindle Aerostatic Bearings, Tribology International, Vol.38(issue1), pp.5-14. (SCI, Impact Factor: 3.246; 16/128, Engineering, Mechanical) [ISSN: 0301-679X] (NSC 89-2212-E-006-165) (42/0, cited/self)
  9. Jiun-Shen Wang and *Cheng-Chi Wang, 2005/8, Nonlinear Dynamic and Bifurcation Analysis of Short Aerodynamic Journal Bearings, Tribology International, Vol.38(issue8), pp.740-748. (SCI, Impact Factor: 3.246; 16/128, Engineering, Mechanical) [ISSN: 0301-679X] (NSC-92-2212-E-269-012) (19/2, cited/self)
  10. *Cheng-Chi Wang, 2006/1, Analysis of an Aerodynamic Grooved Journal Bearing with Plain Sleeve, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.220(issue1), pp.51-60. (SCI, Impact Factor : 0.996; 99/128, Engineering, Mechanical) [ISSN: 0954-4062] (NSC-94-2212-E-269-009) (1/1, cited/self)
  11. *Cheng-Chi Wang, 2006/5, Nonlinear Dynamic Behavior and Bifurcation Analysis of A Rigid Rotor Supported by a Relatively Short Externally Pressurized Porous Gas Journal Bearing System, ACTA Mechanica, Vol.183(issue1-2), pp.41-60. (SCI, Impact Factor: 2.113; 53/134, Mechanics) [ISSN: 0001-5970] (NSC-92-2212-E-269-012) (18/3, cited/self)
  12. Yen-Liang Yeh, Ming-Jyi Jang and Cheng-Chi Wang, 2006/7/15, Analyzing the Free Vibrations of a Plate Using Finite Difference and differential Transformation Method, Applied Mathematics and Computation, Vol.178(issue2), pp.493-501. (SCI, Impact Factor: 2.3; 21/252, Mathematics, Applied) [ISSN: 0096-3003] (NSC-93-2622-E-269-031-CC3) (24/0, cited/self)
  13. *Cheng-Chi Wang, Her-Terng Yau, Ming-Jyi Jang and Yen-Liang Yeh, 2007/3, Theoretical Analysis of the Non-linear Behavior of a Flexible Rotor Supported by Herringbone Grooved Gas Journal Bearings, Tribology International, Vol.40(issue3), pp.533-541. (SCI, Impact Factor: 3.246; 16/128, Engineering, Mechanical) [ISSN: 0301-679X] (NSC 92-2212-E-269-012) (19/3, cited/self)
  14. *Cheng-Chi Wang, Ming-Jyi Jang and Yen-Liang Yeh, 2007/4, Bifurcation and Nonlinear Dynamic Analysis of A Flexible Rotor Supported By Relative Short Gas Journal Bearings, Chaos Solitons & Fractals, Vol.32(issue2), pp.566-582. (SCI, Impact Factor: 2.213; 26/103, Mathematics, Interdisciplinary Applications; 26/78, Physics, Multidisciplinary; 10/55, Physics, Mathematical) [ISSN: 0960-0779] (NSC-94-2212-E-269-009) (37/12, cited/self)
  15. Ming-Jyi Jang, *Cheng-Chi Wang and Cheng-Yu Wu, 2007/4, An Enhanced Common Path Interference Optic Measurement System for Refractive Indices and Thickness, Optics and Laser Technology, Vol.39(issue3), pp.500-506. (SCI, Impact Factor: 2.503; 31/94, Optics; 51/146, Physics, Applied) [ISSN: 0030-3992] (NSC-93-2745-E-269-001) (2/0, cited/self)
  16. Yen-Liang Yeh, Cheng-Chi Wang and Ming-Jyi Jang, 2007/7/15, Using Finite Difference and Differential Transformation Method to Analyze of Large Deflections of Orthotropic Rectangular Plate Problem, Applied Mathematics and Computation, Vol.190(issue2), pp.1146-1156. (SCI, Impact Factor: 2.3; 21/252, Mathematics, Applied) [ISSN: 0096-3003] (NSC-93-2622-E-269-031-CC3) (20/0, cited/self)
  17. *Cheng-Chi Wang, 2007/8, Bifurcation Analysis of an Aerodynamic Journal Bearing System Considering the Effect of Stationary Herringbone Grooves, Chaos Solitons & Fractals, Vol.33(issue5), pp.1532-1545. (SCI, Impact Factor: 2.213; 26/103, Mathematics, Interdisciplinary Applications; 26/78, Physics, Multidisciplinary; 10/55, Physics, Mathematical) [ISSN: 0960-0779] (NSC-94-2212-E-269-009) (14/1, cited/self)
  18. *Cheng-Chi Wang, Ming-Jyi Jang and Yuan-Hung Peng, 2007, An Enhanced Common Path Interference Measurement for Optical Refractive Indices, Key Engineering Materials, Vol.364-366, pp.86-91, (EI). (NSC-93-2745-E-269-001)
  19. Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang, Yen-Pin Lin and Kuang-Sheng Chen, 2007, Determining the thickness and Refractive index of a Birefringence by Using an Improved Accurate Measurement System, Key Engineering Materials, Vol.364-366, pp.510-515. (EI). [ISSN: 1013-9826] (NSC-93-2745-E-269-001)
  20. Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang, Kuang-Sheng Chen and Yen-Pin Lin, 2007, Effect of the Adhesive Mass at the Cantilever Beam Tip Position, Key Engineering Materials, Vol.364-366, pp.773-778. (EI). [ISSN: 1013-9826] (NSC-93-2745-E-269-001)
  21. *Cheng-Chi Wang and Her-Terng Yau, 2008/3, Application of a Hybrid Numerical Method to the Bifurcation Analysis of a Rigid Rotor Supported by a Spherical Gas Journal Bearing System, Nonlinear Dynamics, Vol.51(issue4), pp.515-528. (SCI, Impact Factor: 4.339; 8/128, Engineering, Mechanical; 8/134, Mechanics) [ISSN: 0924-090X] (NSC-95-2221-E-269-016) (23/8, cited/self)
  22. *Cheng-Chi Wang and Her-Terng Yau, 2008/6, Analysis of Nonlinear Dynamic Behavior of Atomic Force Microscope Using Differential Transformation Method, ACTA Mechanica, Vol.198(issue1-2), pp.87-98. (SCI, Impact Factor: 2.113; 53/134, Mechanics) [ISSN: 0001-5970] (NSC-96-2221-E-269-009) (7/3, cited/self)
  23. *Cheng-Chi Wang, 2008/9, Theoretical and Nonlinear behavior Analysis of a Flexible Rotor Supported by a Relative Short Herringbone-Grooved Gas Journal-Bearing System, Physica D-Nonlinear Phenomena, Vol.237(issue18), pp.2282-2295. (SCI, Impact Factor: 1.96; 30/252, Mathematics, Applied; 30/78, Physics, Multidisciplinary; 14/55, Physics, Mathematical) [ISSN: 0167-2789] (NSC-96-2221-E-269-009) (24/9, cited/self)
  24. *Cheng-Chi Wang, 2009/3/1, Application of a Hybrid Method to the Nonlinear Dynamic Analysis of a Flexible Rotor Supported by a Spherical Gas-lubricated Bearing System, Nonlinear Analysis-Theory Methods & Applications, Vol.70(issue5), pp.2035-2053. (SCI, Impact Factor : 1.291; 80/252, Mathematics, Applied; 39/310, Mathematics) [ISSN: 0362-546X] (NSC-95-2221-E-269-016) (33/11, cited/self)
  25. *Cheng-Chi Wang and Her-Terng Yau, 2009/4, Chaotic Analysis and Control of Microcandilevers with PD feedback Using Differential Transformation Method, International Journal of Nonlinear Sciences and Numerical Simulation, Vol.10(issue4), pp.425-444. (SCI, Impact Factor : 1.162; 49/86, Engineering, Multidisciplinary; 96/252, Mathematics, Applied; 95/134, Mechanics; 32/55, Physics, Mathematical) [ISSN: 1565-1339] (NSC-96-2221-E-269-009) (12/2, cited/self)
  26. Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang and Yen-Pin Lin, 2009/5, A High-precision Measurement Technique for Evaluating Alcohol Concentrations Using an Optical Metrology System Based on a Position Sensing Detector, Optics and Lasers in Engineering, Vol.47(issue5), pp.599-603. (SCI, Impact Factor: 3.388; 17/94, Optics) [ISSN: 0143-8166] (NSC-97-2221-E-269-022) (10/1, cited/self)
  27. Chao-Lin Kuo, Cheng-Chi Wang and Neng-Sheng Pai, 2009, Design of Variable Structure Synchronization Controller for Two Different Hyperchaotic Systems Containing Nonlinear Inputs, Journal of Applied Sciences, Vol.9, pp.2635-2639. (EI) [ISSN: 1812-5654] (NSC-97-2221-E-269-022)
  28. Her-Terng Yau and Cheng-Chi Wang, 2009/8, Dynamics Analysis and Fuzzy Logic Controller Design of Atomic Force Microscope System with Uncertainties, Journal of Optoelectronics and Advanced Materials, Vol.11(issue8), pp.1178-1184. (SCI, Impact Factor : 0.39; 273/285, Materials Science, Multidisciplinary; 88/94, Optics; 142/146, Physics, Applied) [ISSN: 1454-4164] (NSC-96-2221-E-269-009) (9/0, cited/self)
  29. *Cheng-Chi Wang, Neng-Sheng Pai and Her-Terng Yau, 2010/3, Chaos Control in AFM System Using Sliding Mode Control by Backstepping Design, Communications in Nonlinear Science and Numerical Simulation, Vol.15(issue3), pp.741-751. (SCI, Impact Factor : 3.181; 7/252, Mathematics, Applied; 8/103, Mathematics, Interdisciplinary Applications; 14/134, Mechanics; 5/31, Physics, Fluids & Plasmas; 2/55, Physics, Mathematical) [ISSN: 1007-5704] (NSC-97-2221-E-269-022) (29/2, cited/self)
  30. *Cheng-Chi Wang, 2010/3, Application of a Hybrid Numerical Method to the Nonlinear Dynamic Analysis of a Micro Gas Bearing System, Nonlinear Dynamics, Vol.59(issue4), pp.695-710 (SCI, Impact Factor: 4.339; 8/128, Engineering, Mechanical; 8/134, Mechanics) [ISSN: 0924-090X] (NSC-96-2221-E-269-009  &  NSC-99-2221-E-269-022) (13/4, cited/self)
  31. *Cheng-Chi Wang and Chao-Lin Kuo , 2010/8, Nonlinear Dynamic Analysis of a Relatively Short Spherical Gas Journal Bearing System, Journal of Mechanical Science and Technology, Vol.24(issue8), pp.1565-1571. (SCI, Impact Factor: 1.128, 87/130, Engineering, Mechanical) [ISSN: 1738-494X] (NSC-97-2221-E-269-022) (1/1, cited/self)
  32. *Cheng-Chi Wang, 2010/9, Bifurcation and Nonlinear Analysis of a Flexible Rotor Supported by a Relative Short Spherical Gas Bearing System, Communications in Nonlinear Science and Numerical Simulation, Vol.15(issue9), pp.2659-2671. (SCI, Impact Factor : 3.181; 7/252, Mathematics, Applied; 8/103, Mathematics, Interdisciplinary Applications; 14/134, Mechanics; 5/31, Physics, Fluids & Plasmas; 2/55, Physics, Mathematical) [ISSN: 1007-5704](NSC-97-2221-E-269-022  & NSC-98-2221-E-269-016) (14/1, cited/self)
  33. Neng-Sheng Pai, *Cheng-Chi Wang and David T-W Lin, 2010/9, Bifurcation Analysis of a Microcantilever in AFM System, Journal of The Franklin Institute-Engineering and Applied Mathematics, Vol.347(issue7), pp.1353-1367. (SCI, Impact Factor: 3.576; 13/61, Automation & Control Systems; 46/260, Engineering, Electrical & Electronic; 8/86, Engineering, Multidisciplinary; 5/103, Mathematics, Interdisciplinary Applications) [ISSN: 0016-0032] (NSC-95-2221-E-269-016) (2/0, cited/self)
  34. *Cheng-Chi Wang and Her-Terng Yau, 2010/11/1, Theoretical Analysis of High Speed Spindle Air Bearings by a Hybrid Numerical Method, Applied Mathematics and Computation, Vol.217(issue5), pp.2084-2096 (SCI, Impact Factor: 2.3; 21/252, Mathematics, Applied) [ISSN: 0096-3003] (NSC-97-2221-E-269-022) (14/0, cited/self)
  35. *Cheng-Chi Wang, 2011/1/10, Bifurcation Analysis of High Speed Spindle Air Bearings, Journal of Vibration and Control, Vol.17(issue1), pp.103-114. (SCI, Impact Factor: 2.197; 11/31, Acoustics; 42/128, Engineering, Mechanical; 48/134, Mechanics) [ISSN: 1077-5463] (NSC-97-2221-E-269-022  & NSC-98-2221-E-269-016) (5/1, cited/self)
  36. Her-Terng Yau, Cheng-Chi Wang, Chin-Tsung Hsieh and Ching-Chang Cho, 2011/4, Nonlinear Analysis and Control of the Uncertain Micro-electro-mechanical System by Using a Fuzzy Sliding Mode Control Design, Computers & Mathematics with Applications, Vol.61(issue8), pp.1912-1916. (SCI, Impact Factor: 1.86; 34/252, Mathematics, Applied) [ISSN: 0898-1221] (NSC-98-2221-E-269-016) (36/0, cited/self)
  37. *Cheng-Chi Wang, and Her-Terng Yau, 2011/4, Application of the Differential Transformation Method to Bifurcation and Chaotic Analysis of an AFM Probe Tip, Computers & Mathematics with Applications, Vol.61(issue8), pp.1957-1962. (SCI, Impact Factor: 1.86; 34/252,  Mathematics, Applied) [ISSN: 0898-1221] (NSC-98-2221-E-269-016 & NSC-99-2221-E-269-008) (11/2, cited/self)
  38. Chien-Nan Lin, Cheng-Chi Wang and Yi-Pin Kuo, 2011/6, The Heat and Fluid Flow Analysis for Water Heater, Thermal Science, Vol.15(issue:S1), pp.81-86. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2221-E-269-016) (0/0, cited/self)
  39. *Cheng-Chi Wang, Ya-Yen  Chou, Shane-Rong Sheu and Ming-Jyi Jang, 2011/6, Application of Ultrasound Thermal Process on Extracting Flavor and Caffeine of Coffee, Thermal Science, Vol.15(issue:S1), pp.69-74. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2622-E-269-004-CC3 & NSC-98-2221-E-012) (1/0, cited/self)
  40. *Cheng-Chi Wang, Her-Terng Yau, Chien-Nan Lin, Po-Jen Cheng and Wei-Min Hung, 2011/6, Application of Lattice Boltzmann Method and Field Synergy Principle to the Heat Transfer Analysis of Channel Flow with Obstacles inside, Thermal Science, Vol.15(issue:S1), pp.75-80. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] (NSC-99-2221-E-269-008 & NSC-99-2221-E-269-009-MY2) (1/0, cited/self)
  41. Her-Terng Yau, Cheng-Chi Wang, Ching-Chang Cho and Chao-Kuang Chen, 2011/6, A Numerical Investigation into Electroosmotic Flow in Microchannels with Complex Wavy Surfaces, Thermal Science, Vol.15(issue:S1), pp.87-94. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] ( NSC-98-2221-E-167-030-MY2). (12/1, cited/self)
  42. *Cheng-Chi Wang, Shane-Rong Sheu, Ya-Yen Chou and Ming-Jyi Jang, 2011/6, A Novel Optimized Energy-Saving Extraction Process on Coffee, Thermal Science, Vol.15(issue:S1), pp.53-59. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2622-E-269-004-CC3 & NSC-98-2221-E-269-012) (1/0, cited/self)
  43. *Cheng-Chi Wang, and Her-Terng Yau, 2011/10, Nonlinear Dynamic Analysis and Sliding Mode Control for a Gyroscope System, Nonlinear Dynamics, Vol.66(issue1-2), pp.53-65. (SCI, Impact Factor: 4.339; 8/128, Engineering, Mechanical; 8/134, Mechanics) [ISSN: 0924-090X]  (NSC-98-2221-E-269-016) (32/0, cited/self)
  44. *Cheng-Chi Wang, 2011/10, Application of a Hybrid Method to the Bifurcation Analysis of a Relative Short Gas Journal Bearing System with Herringbone Grooves, Industrial Lubrication and Tribology, Vol.63(issue5), pp.307-319. (SCI, Impact Factor: 0.763; 109/128, Engineering, Mechanical). [ISSN: 0036-8792] (NSC-97-2221-E-269-022) (5/1, cited/self)
  45. *Cheng-Chi Wang, Ming-Jyi Jang and Shane-Rong Sheu, 2012/4/30, Analysis of Ultrasound Extraction Techniques for Root Bark of Morus Alba, Advanced Science Letters, Vol.9, pp.518-522.[ISSN:1936-6612]( NSC-100-2622-E-269-004-CC3)
  46. *Cheng-Chi Wang, 2012/4/30, Nonlinear Dynamic Analysis of an Elliptic Gas Journal Bearing System via a Hybrid Numerical Method, Advanced Science Letters, Vol.9, pp.896-902. [ISSN: 1936-6612] (NSC 99-2221-E-269-008 & NSC 100-2628-E-269-016-MY2)
  47. *Cheng-Chi Wang, 2012/9, Bifurcation and Nonlinear Dynamic Analysis of United Gas-lubricated Bearing System, Computers & Mathematics with Applications, Vol.64(issue5), pp.729-738. (SCI, Impact Factor: 1.86; 34/252, Mathematics, Applied) [ISSN: 0898-1221] (NSC-100-2628-E-269-016 -MY2) (12/2, cited/self)
  48. *Cheng-Chi Wang, Shane-Rong Sheu and Ming-Jyi Jang, 2013/4, Analysis of Supercritical Carbon Dioxide Extraction for the Caffeine and Epigallocatechin-3-gallate in Green Tea, Journal of Biobased Materials and Bioenergy, Vol.7(issue 2), pp.208-212. (SCI, Impact Factor: 2.993; 18/72, Chemistry, Applied; 42/97, Energy & Fuels; 18/33, Materials Science, Biomaterials) [ISSN: 1556-6560] (NSC 101-2622-E-269 -010 -CC3) (0/0, cited/self)
  49. *Cheng-Chi Wang and Chi-Chang Wang, 2013/4, Bifurcation and Nonlinear Dynamic Analysis of Noncircular Aerodynamic Journal Bearing System, Nonlinear Dynamics, Vol.72(issue1), pp.477-489. (SCI, Impact Factor: 4.339; 8/128, Engineering, Mechanical; 8/134, Mechanics) [ISSN: 0924-090X] (NSC-100-2628-E-269-016 -MY2) (4/1, cited/self)
  50. *Cheng-Chi Wang and Her-Terng Yau, 2013/9, Chaos Analysis and Synchronization Control of Coronary Artery Systems, Abstract and Applied Analysis, Vol. 2013 (2013), Article ID 209718, 11 pages(http://dx.doi.org/10.1155/2013/209718). (SCI, Impact Factor: 1.274; 50/251, Mathematics, Applied; 23/302, Mathematics) [ISSN: 1085-3375] (NSC-100-2628-E-269-016 -MY2) (3/0, cited/self)
  51. *Cheng-Chi Wang and Her-Terng Yau, 2013/10, Bifurcation Analysis of Bearing Number in Ultra short Gas Bearing System, Smart Science, Vol. 1(issue1), pp.18-24. [ISSN: 2308-0477] (NSC-102-2221-E-167-035) (0/0, cited/self)
  52. *Cheng-Chi Wang, Chung-Neng Huang, Her-Terng Yau and Shin-Xiang Hsu, 2013/11, Bifurcation and Chaos Analysis of Atomic Force Microscope System, Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, Vol.19(issue11), pp.1795-1805. (SCI, Impact Factor: 1.581; 147/260, Engineering, Electrical & Electronic; 71/92, Nanoscience & Nanotechnology; 183/285, Materials Science, Multidisciplinary; 85/146, Physics, Applied) [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2) (2/1, cited/self)
  53. Kuo-Chi Liu, Cheng-Chi Wang and Po-Jen Cheng, 2013/12, Nonlinear Behavior of Thermal Lagging in Laser-Irradiated Layered Tissue, Advances in Mechanical Engineering, Vol. 2013, Article ID 732575, 6 pages(http://dx.doi.org/10.1155/2013/732575). (SCIE, Impact Factor: 0.848; 49/59, Thermodynamics; 103/128, Engineering, Mechanical) [ISSN: 1687-8132] (1/0, cited/self)
  54. *Cheng-Chi Wang, Her-Terng Yau and Chi-Chang Wang, 2013/12, Chaotic and Subharmonic motion Analysis of Floating Ring Gas Bearing System by Hybrid Numerical Method, Mathematical Problems in Engineering, Vol. 2013, Article ID 145716, 14 pages (http://dx.doi.org/10.1155/2013/145716). (SCI, Impact Factor: 1.145; 51/86, Engineering, Multidisciplinary; 57/103, Mathematics, Interdisciplinary Applications) [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2) (3/0, cited/self)
  55. *Cheng-Chi Wang and Her-Terng Yau, 2013/12, Application of Hybrid Microwave Thermal Extraction Techniques for Mulberry Root Bark, Thermal Science, Vol. 17(issue 5), pp.1311-1315. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] ( NSC-98-2221-E-167-030-MY2). (1/0, cited/self)
  56. *Cheng-Chi Wang, Po-Jen Cheng, Kuo-Chi Liu and Ming-Yi Tsai, 2014/2, Flow and Stress Field Analysis of Different Fluids and Blades for Fermentation Process, Advances in Mechanical Engineering, Vol. 2014, Article ID 623781, 10 pages (http://dx.doi.org/10.1155/2014/623781). (SCIE, Impact Factor: 0.848; 49/59, Thermodynamics; 103/128, Engineering, Mechanical) [ISSN: 1687-8132] (NSC-98-2622-E-269-004-CC3, NSC-102-2221-E-167-035, NSC-102-2622-E-167-013-CC3) (0/0, cited/self)
  57. *Cheng-Chi Wang, Chieh-Li Chen and Her-Terng Yau, 2014/4/1, Bifurcation and Chaotic Analysis of Aeroelastic Systems, ASME Journal of Computational and Nonlinear Dynamics, Vol.9(issue2), Article ID 021004, 13 pages (http://dx.doi.org/10.1115/1.4025124). (SCI, Impact Factor: 1.996; 52/128, Engineering, Mechanical; 57/13, Mechanics) [ISSN: 1555-1423] (NSC-100-2628-E-269-016 -MY2) (3/0, cited/self)
  58. *Cheng-Chi Wang, Chin-Chia Liu and Chi-Chang Wang, 2014/4, Bifurcation and Nonlinear Dynamic Analysis of Externally Pressurized Double Air films Bearing System, Mathematical Problems in Engineering, Vol. 2014, Article ID 798374. (http://dx.doi.org/10.1155/2014/798374). (SCI, Impact Factor: 1.145; 51/86, Engineering, Multidisciplinary; 57/103, Mathematics, Interdisciplinary Applications) [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2 & NSC-102-2221-E-167-035) (0/0, cited/self)
  59. *Cheng-Chi Wang and Chin-Chia Liu, 2014/6, Chaotic Dynamic Analysis of Aquatic Phytoplankton System, Mathematical Problems in Engineering, Vol. 2014, Article ID 586262. (http://dx.doi.org/10.1155/2014/586262). (SCI, Impact Factor: 1.145; 51/86, Engineering, Multidisciplinary; 57/103, Mathematics, Interdisciplinary Applications) [ISSN: 1204-123X] (Most 103-2622-E-167-015-CC3) (2/0, cited/self)
  60. Chin-Chia Liu and Cheng-Chi Wang, 2014/7/1, Numerical Investigation Into Nonlinear Dynamic Behavior of Electrically-Actuated Clamped-Clamped Micro-Beam with Squeeze-Film Damping Effect, Applied Mathematical Modelling, Vol.38(issue13), pp.3269-3280. (SCI, Impact Factor: 2.617; 18/86, Engineering, Multidisciplinary; 15/103, Mathematics, Interdisciplinary Applications; 25/13, Mechanics)  [ISSN: 0307-904X] (NSC-100-2628-E-269-016 -MY2) (8/0, cited/self)
  61. Jui-Ho Chen and *Cheng-Chi Wang, 2015/4, Chaotic and Dynamic Analysis of a Flexible Rotor Supported by Ultra Short Aero-lubricated Bearing System, Journal of Applied Research and Technology, Vol. 13(2), pp.328-341. (SCI, Impact Factor: 0.447; 71/87, Engineering, Multidisciplinary; 203/248, Engineering, Electrical & Electronic) [ISSN: 2308-0477] (MOST 103-2221-E-167 -011) (0/0, cited/self)
  62. *Cheng-Chi Wang, Shane-Rong Sheu, Her-Terng Yau, and Ming-Jyi Jang, 2015/8, Effect of Coffee Reduction on Constituent Concentration in an Energy-Efficient Process of Ultrasonic Extraction, Thermal Science, Vol.19(issue4), pp.1383-1387. (SCIE, Impact Factor: 1.433; 33/59, Thermodynamics) [ISSN: 0354-9836] (MOST-104-2221-E-167-014 & MOST-104-2622-E-167-006-CC3). (0/0, cited/self)
  63. Her-Terng Yau, Cheng-Chi Wang, Chin-Tsung Hsieh, Shang-Yi Wu, 2015/9, Fractional Order Sprott Chaos Synchronization-Based Real-Time Extension Power Quality Detection Method, IET Generation Transmission & Distribution, Vol.9(issue16), pp.2775-2781. (SCI, Impact Factor : 2.618; 87/260, Engineering, Electrical & Electronic) [ISSN: 1751-8687] DOI:  10.1049/iet-gtd.2015.0500(3/0, cited/self)
  64. Ming-Yi Tsai, Sheng-Yen Chang, Jui-Pin Hung, Cheng-Chi Wang, 2016/4, Investigation of Milling Cutting Forces and Cutting Coefficient for Aluminum 6060-T6, Computers & Electrical Engineering, Vol.51, pp.320-330. (SCI, Impact Factor : 1.747; 20/52, Computer Science, Hardware & Archtecture；62/105, Computer Science, Interdisciplinary Applications；134/260, Engineering, Electrical & Electronic) [ISSN: 0045-7906] (3/0, cited/self)
  65. Kuo-Nan Yu, *Cheng-Chi Wang, Her-Terng Yau, Jen-Liang Chen, 2016/4, Numerical Computation and Nonlinear Dynamic Analysis of Ultrasonic Cutting System, Computers & Electrical Engineering, Vol.51, pp.270-283. (SCI, Impact Factor : 1.747; 20/52, Computer Science, Hardware & Archtecture；62/105, Computer Science, Interdisciplinary Applications；134/260, Engineering, Electrical & Electronic) [ISSN: 0045-7906] (2/0, cited/self)
  66. *Cheng-Chi Wang and Jui-Pin Hung, 2016/5, Theoretical and Bifurcation Analysis of a Flexible Rotor Supported by Gas-Lubricated Bearing System with Porous Bushing, Journal of Vibroengineering, Vol.18(issue3), pp.1934-1940. (SCIE, Impact Factor: 0.398; 75/77, Engineering, Biomedical；117/130, Engineering, Mechanical) [ISSN: 1392-8716] (MOST 103-2622-E-167 -015 -CC3 and 103-2221-E-167 -011) (3/1, cited/self)
  67. *Cheng-Chi Wang, Tsui-Er Lee, 2016/1, Optimization Design and Application of Composite Ultrasonic Extraction Method for Effective Constituents of Green Tea, Advances in Mechanical Engineering, Vol.8(issue 1), pp.1-9. (SCIE, Impact Factor: 0.848; 49/59, Thermodynamics; 103/128, Engineering, Mechanical) [ISSN: 1687-8132] (NSC-98-2622-E-269-004-CC3, NSC-102-2221-E-167-035, NSC-102-2622-E-167-013-CC3) (0/0, cited/self)
  68. *Cheng-Chi Wang, Tsui-Er Lee, 2016, Performance Analysis and Improvement Design of Golf Clubs, Transactions of the Canadian Society for Mechanical Engineering, Vol.40(issue 4), pp.667-675. (SCIE, Impact Factor: 0.248; 123/128, Engineering, Mechanical) [ISSN: 0135-8977] (MOST 103-2622-E-167 -015 -CC3 and 103-2221-E-167 -011) (0/0, cited/self)
  69.  Tsung-Chia Chen, Chia-Jung Chang, Jui-Pin Hung, Rong-Mao Lee, Cheng-Chi Wang, 2016/4, Real-Time Compensation for Thermal Errors of the Milling Machine, Applied Sciences-Basel, Vol.6(issue 4), pp.1-13. (doi:10.3390/app6040101). (SCI, Impact Factor : 1.689; 98/171, Chemistry, Multidisciplinary; 171/285, Materials Science, Multidisciplinary ; 77/146, Physics, Applied) [ISSN: 2076-3417] (1/0, cited/self)
  70. Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, I-Sheng Hsieh, 2016/8, Particle Swarm Optimization used with Proportional–Derivative Control to Analyze Nonlinear Behavior in the Atomic Force Microscope, Advances in Mechanical Engineering, Vol.8(issue 9), pp.1-10. (SCIE, Impact Factor: 0.848; 49/59, Thermodynamics; 103/128, Engineering, Mechanical) [ISSN: 1687-8132] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014) (1/0, cited/self)
  71. *Cheng-Chi Wang, 2017/7, Non-periodic and Chaotic Response of Three-Multilobe Air Bearing System, Applied Mathematical Modelling, Vol.47, pp.859-871.  (SCIE, Impact Factor: 2.617; 18/86, Engineering, Multidisciplinary; 15/103, Mathematics, Interdisciplinary Applications; 25/13, Mechanics) [ISSN: 0307-904X] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014) (4/0, cited/self)
  72. *Cheng-Chi Wang, 2017/2, Chaotic Behaviour Investigation of a Front Opposed-Hemispherical Spiral-Grooved Air Bearing System, Shock and Vibration, Vol. 2017 (2017), Article ID 8985040, 18 pages. (SCIE, Impact Factor: 1.857; 12/31, Acoustics; 58/128, Engineering, Mechanical; 62/134, Mechanics)  [ISSN: 1070-9622] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014) (0/0, cited/self)
  73. Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, 2017/7, Control Circuit Design and Chaos Analysis in an Ultrasonic Machining System, Engineering Computations, Vol. 34(7), pp.2189-2211, https://doi.org/10.1108/EC-02-2017-0044 (SCIE, Impact Factor: 1.177; 82/105, Computer Science, Interdisciplinary Application; 47/86, Engineering, Multidisciplinary; 54/103, Mathematics, Interdisciplinary Applications; 94/134, Mechanics) [ISSN: 0264-4401] (MOST- 105-2221-E-167-010, MOST 105-2622-E-167 -007 -CC3) (0/0, cited/self)
  74. *Cheng-Chi Wang, Tsui-Er Lee, 2017/9, Nonlinear Dynamic Analysis of Bi-directional Porous Aero-thrust Bearing Systems, Advances in Mechanical Engineering, Vol. 9(12), pp.1-11. DOI: 10.1177/1687814017738153 (SCIE, Impact Factor: 0.848; 49/59, Thermodynamics; 103/128, Engineering, Mechanical) [ISSN: 1687-8132] (MOST- 105-2221-E-167-010, MOST 105-2622-E-167 -007 -CC3) (0/0, cited/self)
  75. Chih-Wen Chang, Chein-Hung Liu, *Cheng-Chi Wang, 2018/1, Review of Computational Schemes in Inverse Heat Conduction Problems, Smart Science, Vol. 6(1), pp.94-103. (ESCI) https://doi.org/10.1080/23080477.2017.1408987[ISSN: 2308-0477].
  76. Chih-Wen Chang, Chein-Hung Liu, *Cheng-Chi Wang, 2018/6, A Modified Polynomial Expansion Algorithm for Solving the Steady-state Allen-Cahn Equation for Heat Transfer in Thin Films, Applied Sciences-Basel, Vol. 8(6), pp.983-998. (doi:10.3390/app8060983). (SCI, Impact Factor : 1.689; 98/171, Chemistry, Multidisciplinary; 171/285, Materials Science, Multidisciplinary ; 77/146, Physics, Applied) [ISSN: 2076-3417].
  77. Rong-Mao Lee, Pao-Ting Liu, Cheng-Chi Wang, 2018/11, Investigation of Milling Stability Under Cutting Fluid Supply by Microphone Signal Analysis, Sensors and Materials, Vol. 30(11), pp.2419-2428. (SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935].
  78. *Cheng-Chi Wang, Chih-Jer Lin, Chin-Chia Liu, Chia-Chiang Hsu, 2018/11, Analysis of Pull-In Characteristics of Double-Clamped Nanobeam Incorporating Casimir and van der Waals Effects, Sensors and Materials, Vol. 30(11), pp.2627-2636. (SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935].
  79. Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, Yi-Sheng Hsieh, 2019, Non-linear Behavior Analysis and Control of the Atomic Force Microscope and Circuit Implementation, Journal of Low Frequency Noise Vibration and Active Control, Vol. 38(3-4), pp. 1576-1593.  (SCIE, Impact Factor: 1.491; 19/31, Acoustics) [ISSN: 0263-0923] (MOST- 106-2221-E-167-012-MY2, 106-2218-E-167001 & 106-2622-E-167-010-CC3).
  80. Her-Terng Yau, Cheng-Chi Wang, Jin-Yu Chang, and Xiao-Yi Su, 2019, A Study on the Application of Synchronized Chaotic Systems of Different Fractional Orders for Cutting Tool Wear Diagnosis and Identification, IEEE Access, Vol. 7, pp.15903-15911. (SCIE, Impact Factor: 3.557; 24/140, Computer Science, Information Systems; 48/260, Engineering, Electrical & Electronic; 19/87, Telecommunications) [ISSN: 2169-3536] (MOST-106-2221-E-167-012-MY2)
  81. *Cheng-Chi Wang, Rong-Mao Lee, Her-Terng Yau, Tsui-Er Lee, 2019, Nonlinear Analysis and Simulation of Active Hybrid Aerodynamic and Aerostatic Bearing System, Journal of Low Frequency Noise Vibration and Active Control, Vol. 38(3-4), pp. 1404-1421, https://doi.org/10.1177/1461348418792737. (SCIE, Impact Factor: 1.491; 19/31, Acoustics) [ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)
  82. Bo-Lin Jian, Cheng-Chi Wang, Jin-Yu Chang, Xiao-Yi Su, Her-Terng Yau, 2019, Machine Tool Chatter Identification Based on Dynamic Errors of Different Self-synchronized Chaotic Systems of Various Fractional Orders, IEEE Access, Vol. 7, pp.67278-67286. (SCIE, Impact Factor: 3.557; 24/140, Computer Science, Information Systems; 48/260, Engineering, Electrical & Electronic; 19/87, Telecommunications) [ISSN: 2169-3536] (MOST-106-2221-E-167-012-MY2)
  83. *Cheng-Chi Wang, Rong-Mao Lee, Chih-Jer Lin, Chih-Yung Huang, Tsui-Er Lee, 2019, Research on the Nonlinear Dynamic Characteristics of Opposed High-Speed Gas Bearing Systems, Journal of Low Frequency Noise Vibration and Active Control, On line first. https://doi.org/10.1177/1461348419834758. (SCIE, Impact Factor: 1.491; 19/31, Acoustics) [ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)
  84. Chih-Jer Lin, Wen-Lin Chu, Cheng-Chi Wang, Chih-Keng Chen, I-Ting Cheng, 2019, Diagnosis of Ball Bearing Faults Using Support Vector Machine Based on the Artificial Fish-Swarm Algorithm, Journal of Low Frequency Noise Vibration and Active Control, On line first. https://doi.org/10.1177/1461348419861822 (SCIE, Impact Factor: 1.491; 19/31, Acoustics) [ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)
  85. Bo-Lin Jian, Cheng-Chi Wang, Chin-Tsung Hsieh, Ying-Piao Kuo, Mao-Chin Houng, Her-Terng Yau, 2019, Predicting Spindle Displacement Caused by Heat Using the General Regression Neural Network, International Journal of Advanced Manufacturing Technology, Vol. 104, pp.4665-4674. https://doi.org/10.1007/s00170-019-04261-5 (SCIE, Impact Factor: 2.496; 29/62, Automation & Control systems; 23/49, Engineering, Manufacturing ) [ISSN: 1433-3015] (MOST- 107-2622-E-167-002 -CC3)
  86. *Cheng-Chi Wang, Xin-Xiang Zhuo, Yong-Quan Zhu, 2020, Optimization Analysis of Vibration for Grinder Spindle, Sensors and Materials, Vol. 32(1), pp.407-416. (SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935] (MOST- 107-2622-E-167-002 -CC3)
  87. Rong-Mao Lee, Zhi-Bin Wu, Cheng-Chi Wang, and Tsung-Chia Chen, 2020/3, Multi-Hybrid Active Magnetic Bearing Design for Milling Spindle Applications, Sensors and Materials, Vol. 32(1), pp.375-385. (SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935]
  88. Rong-Mao Lee, Yi-Hsing Yu, Cheng-Chi Wang, Tsung-Chia Chen, and Pongpon Nilaphruek, 2020/3, Acoustic Signal Analysis by Teager-Huang Transform for Milling Chatter Recognition, Sensors and Materials, Vol. 32(3), pp.873–884. (SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935]
  89. Bo-Lin Jian, Cheng-Chi Wang, Her-Terng Yau, Li-Wei Wu, An-Hong Tian, 2020/3, Optimization of Lathe Cutting Parameters using Taguchi Quality and Grey Relational Analysis, Sensors and Materials, Vol. 32(3), pp.843–858.(SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935]
  90. Rong-Mao Lee, Shih-Hsuan Hu, Cheng-Chi Wang, Tsung-Chia Chen, and Jui-Hung Liu, 2020/3, Design and Development of Condition Monitoring System for Wind Turbines Based on Generator Output Voltages, Sensors and Materials, Vol. 32(3), pp.895–907.(SCIE, Impact Factor: 0.482; 57/61, Instruments & Instrumentation; 266/285, Materials Science, Multidisciplinary) [ISSN: 0914-4935]