姓名職稱：

洪瑞斌 特聘教授/工程學院副院長

電子郵件：

hungjp@ncut.edu.tw

電話：

04-23924505 ext 7181

傳真：

04-23939932

實驗室：

8805

研究領域：

光機電系統整合、生醫工程

教學課程：

光學產品設計、生醫工程、有限元素分析

研究計畫：

人工骨柄表面特徵化之力學效應研究(96-2221-E-167-017-)

國家科學委員會

2007/8/1 至 2008/7/31

主持人
 

智慧型電腦輔助製造系統(96-2221-E-212-023-)

國家科學委員會

2007/8/1 至 2008/7/31

共同主持人
 

滾柱螺桿接觸幾何之力學效應分析

上銀科技股份有限公司

2007/05/10 至 2008/05/09

主持人

 

工具機滑動導軌耐磨襯墊之力學特性研究(96-2622-E-167-002-CC3)

國家科學委員會

詠勤機械公司

2007/5/1 至 2008/4/30

主持人
 

骨水泥製備填充技術對鍵結強度之影響性研究

國軍台中總醫院

2007/01/01 至 2007/12/31

協同主持人
 

長短腿個體在步態中立期時股骨與髖關節力學形態之研究(重點研究計畫)(95-2221-E-040-002-)

國家科學委員會

2006/8/1 至 2007/7/31

共同主持人
 

長行程工作台進給裝置之創新設計(95-2622-E-167-001-CC3)

國家科學委員會

詠勤機械公司

2006/5/1 至 2007/4/30

主持人
 

長短腿對脊柱變形之生物力學效應及關係性研究(二)(94-2614-E-040-001-)

國家科學委員會

2005/8/1 至 2006/7/31

共同主持人
 

脊椎成形術臨床效應之實驗分析與生物力學研究(94-2213-E-005-035-)

國家科學委員會

2005/8/1 至 2006/7/31

共同主持人
 

異質性雙材料鍵結介面崩解行為之探討(94-2212-E-167-004-)

國家科學委員會

2005/8/1 至 2006/7/31

主持人
 

CNC重型龍門工具機結構分析與最佳化設計(94-2622-E-167-003-CC3)

國家科學委員會

詠勤機械公司

2005/5/1 至 2006/4/30

主持人
 

人工髖關節介面分離之力學效應評估(93-2213-E-005-030- )

國家科學委員會

2004/8/1 至 2005/7/31

共同主持人
 

生醫骨泥/密質骨介面破裂特性之實驗與力學研究(93-2212-E-253-006- )

國家科學委員會

2004/8/1 至 2005/7/31

主持人
 

長短腿對脊柱變形之生物力學效應及關係性研究(93-2213-E-040-004- )

國家科學委員會

2004/8/1 至 2005/7/31

共同主持人
 

雙金屬帶鋸設計參數對切削性能之影響性研究(93-2622-E-253-005-CC3)

國家科學委員會

歐德公司

2004/5/1 至 2005/4/30

主持人
 

大型分歧壓力鋼管之有限元素分析(92-2622-E-253-008-CC3)

國家科學委員會

嵩洋公司

2003/12/1 至 2004/11/30

共同主持人
 

脊椎解離之生物力學研究(92-2218-E-005-001- )

國家科學委員會

2003/8/1 至 2004/7/31

共同主持人
 

防爆門抗爆強度之有限元素分析(92-2622-E-253-005-CC3)

國家科學委員會

嵩洋公司

2003/6/1 至 2004/5/31

主持人
 

滾珠導螺桿接觸破壞機制之力學分析

上銀科技股份有限公司

2003/12/01 至 2004/11/30

共同主持人
 

線性滑軌滑塊結構之最佳化設計

上銀科技股份有限公司

2003/12/01 至 2004/11/30

共同主持人

個人簡歷

學歷：

國立中興大學機械所博士

經歷：

自動化工程系副教授

研發處組長

榮譽：

研究著作

學術期刊：

1 J. P. Hung*, 2007,“Load effect on the vibration characteristics of a stage with rolling guides”, Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science.(Submitted) (SCI) (*corresponding author)

2 C. Y. Lin, J. P. Hung*, T. C. Hsu, 2008, “Failure analysis of reverse shaft in the transmission System of all terrain vehicles” Journal of Failure Analysis and Prevention, ( On-line available)(SCI, EI) (*corresponding author)

3 M. W. Shieh, J. P. Hung*, D. J. Chen, 2007,“Investigation on the blast resistance of a stiffened door structure”, Journal of Marine Science and Technology, (Accepted for publication ) (EI) (*corresponding author)

4 H. C. Lin, J. P. Hung, J. S. S. Wu, J. H. Chen, 2007, “The study of positive correlation between bone frame mineral density and volume fraction in cortical bone”, Journal of Medical and Biological Engineering, Vol. 27, No.3, pp. 136-142. (EI)

5 J. C. Chang, J. S. S. Wu, J. P. Hung, 2007, “Characterization of the Dynamic Behavior of a Linear Guideway Mechanism”, Structural Engineering and Mechanics. Vol. 25, No.1, pp. 1-10. (SCI)

6 J. C. Chang, J. S. S. Wu, J. P. Hung, 2007, “The Effect on Dynamic Behaviors of Rolling Contact Elements ", Mathematics and Computers in Simulation. Vol.74, No.6, pp.454-467. (SCI),

7 T. Z. Luo, J. S. S. Wu, J. P. Hung, 2006, “A Generalized Algorithm for the Study of Bilinear Vibrations Cracked Structures”, Structural Engineering and Mechanics. Vol. 23. No. 1, pp. 1-13. (SCI)

8 Y. L. Lai, J. S. S. Wu, J. P. Hung, 2006, “A Simple Method for Invalid Loops Removal of Planar Offset Curves”, International Journal of Advanced Manufacturing Technology, Vol. 27, No.11-12, pp. 1153-1162. (SCI)

9 Y. L. Lai, J. S. S. Wu, J. P. Hung, 2006, “Degree Reduction of NURBS Curves”, International Journal of Advanced Manufacturing Technology, Vol.27, No.11-12, pp.1124-1131. (SCI) .

10 H. C. Lin, J. P. Hung, J. S. S. Wu, J. H. Chen, 2006,“Effects of Bone Mineral Fraction and Volume Fraction on Mechanical Properties of Cortical Bone,” Journal of Medical and Biological Engineering.Vol. 21, No. 1, pp. 1-7 (EI)

11 T. Z. Luo, J. S. S. Wu, J. P. Hung, 2005,“A Study of Nonlinear Vibration Behavior of Cracked Structures by the Finite Element Method”, Journal of Marine Science and Technology. Vol. 13. No. 3, pp. 1-8. (EI)

12 J. P. Hung, J. H. Chen, H. L. Chiang, J. S. S. Wu, 2004, “Computer Simulation on Fatigue Behavior of Cemented Hip Prostheses: A Physiological Model”, Computer Method and Program in Biomedicine. Vol.76, pp. 103-113（SCI）.

13 J. P. Hung, J. S. S. Wu, J. H. Chen, 2004, “Impact Failure Analysis of Re-circulating Mechanism in Ball Screw”, Engineering Failure Analysis. Vol. 11, pp. 561-573. (SCI)

14 J. P. Hung, J. S. S. Wu, J. H. Chen, 2003, “Effects of Interfacial Debonding on Fatigue Damage of Cemented Hip Prosthesis”, Journal of Chinese Institute of Engineers, Vol. 26, No. 4, pp.791-801 (SCI).

15 J. S. S. Wu, J. P. Hung, C. S. Shu, J. H. Chen, 2003, “The Computer Simulation of Wear Behavior Appearing in Total Hip Prosthesis”, Computer Method and Program in Biomedicine, Vol.70, No 4, pp.81-91. (SCI)

16 J. P. Hung, J. S. S. Wu, 2002, “A Comparative Study on Wear Behavior of Hip Prosthesis by Finite Element Simulation”, Journal of Biomedical Engineering, Application, base and communication. Vol. 14, No. 4, pp. 139-148. (EI)

17 J. H. Chen, J. S. S. Wu, W. H. Chang, W. H. Chao, J. P. Hung, T. L. Lo, 2000, “The Influence of Bone Resorption on Interface Stresses of the Femoral Stem,” Chinese Journal of Medical and Biological Engineering, Vol. 20, No.1, pp. 13-18.

研討會：

1 J. P. Hung , M. Z. Shieh, Y. L. Lai. Y. H. Chen, 2007.12, “Dynamic characteristics of a nut-driven feed mechanism”, The 1st Cross-Strait Seminar on Engineering & Technology Education and Industry-Academy Integration, December 6-8, 2007, Chsngzhou, Jiangsu, China.

2 Y. L. Lai, Y. T. Hsu, J. P. Hung, T. S. Li, 2007.11 “Spatial Cam's Roller Guide- Design and Manufacturing”, Proc. of the 24th National Conference on Mechanical Engineering (CSME), Chungli, ROC.

3 Y. L. Lai, C. C. Li, J. P. Hung, K. M. Ghoua, 2007.12, “Development for the design and manufacture of machining cutters”, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C.

4 Y. H. Chen, J. P. Hung , M. Z. Shieh, Y. L. Lai. 2007.12, “Investigation on the dynamic characteristics of a nut-driven feed mechanism”, The 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 2007, ISU, Kaohsiung, Taiwan, R.O.C.

5 J. P. Hung , Y. S. Cho, Z. W. Fan, 2007.5, “Investigation on the dynamic characteristics of a gantry Structure”, The 5th Conference on Precision Machinery and Manufacturing Technology－PMMT. Taiwan.

6 J. P. Hung , Z. W. Fan, Y. S. Cho, 2007.5, “ Modeling of the rolling contact interface and

7 analysis on the dynamic characteristic of a linear guide”, The 5th Conference on Precision Machinery and Manufacturing Technology－PMMT. Taiwan.

8 Z. W. Fan, J. P. Hung, M. C. Shieh. 2007.5, “ Load effect on the dynamic characteristic of a stage with rolling guide”, The 15th Conference on Sound and Vibration, Taiwan, ROC

9 Y. S. Cho, M. C. Shieh, J. P. Hung, 2007.6, “ Investigation of the preload effect of rolling guide on the dynamic Characteristic of a Gantry”, The 15th Conference on Sound and Vibration, Taiwan.

10 J. P. Hung , Z. W. Fan, Y. S. Cho, 2007.6, “ Modeling of the rolling contact interface and analysis on the dynamic Characteristic of a linear guide”, The 15th Conference on Sound and Vibration, Taiwan.

11 Q. Q. Tian, J. P. Hung , Y.L. Lai, 2007. 6, “ Dynamic characteristic of a newly designed linear module with sliding guide”, The 5th Conference on Precision Machinery and Manufacturing Technology－PMMT. Taiwan.

12 J. P. Hung, J.H. Chen, Y. L. Lai, H. C. Lin，2007.5, ” An Investigation on the debonding behavior of bone/cement interface”, The 10th Conference on Chinese Medicine and Pharmacy, Engineering Technology and Applications to Chinese and Western Medicine.

13 J. S. S. Wu, H. C. Lin, J. P. Hung, J.H. Chen, 2006.12, “Biomechanical study and experimental anslysis on clinical effect of vertebroplasty”, Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

14 J. H. Chen, J. P. Hung, J.S.S. Wu, K. S. Lin, 2006.12, “Stress Characteristics of Lumbar Spine in Subjects with Leg Length Discrepancy and Scoliosis”, Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

15 Y.L. Lai, D. S. Lee, J. P. Hung, 2006.12, “The Study of Tool-path Generation of Spatial Cam's Roller Guide by using Smaller Tool with Multi-cut” The 30thNational Conference on Theoretical and Applied Mechanics, December 15-16, 2006, DYU, Changhwa, Taiwan.

16 J. P. Hung, J.H. Chen , Y. L. Lai, H. C. Lin, 2006.5, ” Effect of Bone Composition on the Mechanical Properties of Cortical Bone”,The 9th Conference on Chinese Medicine and Pharmacy, Engineering Technology and Applications to Chinese and Western Medicine.

17 J. H. Chen, J. P.Hung,Y.J. Ho, S.C. Chuang, H.C. Lin, 2006.5, “Effects of Dioscorea on Bone Physical Parameters and Mechanical Properties in the Ovariectomized Rats”, The 9th Conference on Chinese Medicine and Pharmacy, Engineering Technology and Applications to Chinese and Western Medicine.

18 J. C. Chang, J.S.S. Wu, J. P. Hung, 2006.6，”Characterization of the Dynamic Behavior of a Linear Guideway Mechanism”, The 14th Conference on Sound and Vibration, Taiwan.

19 J.S.S. Wu, T.L. Luo, J.H. Chen, J. P. Hung, 2006.6,”A Study of Bilinear Vibrational Behavior of Cracked Structures.”, The 14th Conference on Sound and Vibration, Taiwan.

20 J.H. Chen, J. P. Hung, J.S.S. Wu, K S. Lin, 2005.12, “Study on the biomechanical effect and relationship between leg length discrepancy and spinal deformity (1/2)”, Annual Symposium, The Biomedical Engineering Society, ChungLi, Taiwan

21 J. P. Hung, J.S.S. Wu, J.H. Chen , H. C. Lin, 2005.12, “Experimental and mechanical study on the fracture characteristics of the bone/cement interface”, Annual Symposium, The Biomedical Engineering Society, ChungLi, Taiwan.

22 J.S.S. Wu, J. P. Hung ,J.H. Chen , Y.L. Lai, H. C. Lin, 2005.12, Experimental and mechanical study on the fracture characteristics of the cortical bone” Annual Symposium, The Biomedical Engineering Society, ChungLi, Taiwan.

23 J.S.S. Wu, J. P. Hung ,J.H. Chen , H. C. Lin, 2005.12, “Separation effect on the mechanical performance of artificial hip arthroplasty”, Annual Symposium, The Biomedical Engineering Society, Chungli, Taiwan.

24 Yuan-Lung Lai, Jui-Pin Hung, 2005. “A study of toy collaborative product design”, The International Conference on Toy and Game Workforce Development Taipei Taiwan.

25 Yuan-Lung Lai, Jui-Pin Hung, Dong-Sheng Lee, 2005. “Robust Offset Strategy on Planar Curves” Proc. of the 22th National Conference on Mechanical Engineering (CSME), Taiwan

26 J. S. S. Wu, J. P. Hung, H. C. Lin, 2004.12, “Bone Mineral Density is Correlated Positively with Volume Fraction n Cortical Bone” Annual Symposium, The Biomedical Engineering Society, Tainan, Taiwan.

27 J. H. Chen, J. S. S. Wu, J. P. Hung, H. C. Lin, 2004.12, “Bone Mineral Density is Correlated Positively with Volume Fraction n Cortical Bone” Annual Symposium, The Biomedical Engineering Society, Tainan, Taiwan.

28 J. P. Hung, J. H. Chen, J. S. S. Wu, H. C. Lin, 2004.12, “Surface Damage Analysis of UHWMPE Aectabular Cup in Artificial Hip Joint” Annual Symposium, The Biomedical Engineering Society, Tainan, Taiwan.（優等論文獎）

29 J. S. S. Wu, J. H. Chen, J. P. Hung, H. C. Lin, 2004.12,“Biomechanical Study on Spondylolysis” Annual Symposium, The Biomedical Engineering Society, Tainan, Taiwan.

30 H. C. Lin, J. P. Hung, J. H. Chen, J. S. S. Wu, 2004.06 “FE Simulation of Fatigue behavior of Cemented Hip Prosthesis under physiology conditions” The 7th Conference on Chinese Medicine and Pharmacy, Engineering Technology and Applications to Chinese and Western Medicine.

31 H. C. Lin, J. P. Hung, J. H. Chen, J. S. S. Wu, 2004.06 “FE Simulation of Fatigue behavior of Cemented Hip Prosthesis under physiology conditions” The 7th Conference on Chinese Medicine and Pharmacy, Engineering Technology and Applications to Chinese and Western Medicine.

32 J. S. S. Wu, J. H. Chen, J. P. Hung, 2003.12 “Finite Element Study on the Contact and Wear Behavior of Interface for Artificial Hip Joins with Diamond-like Coatings” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

33 J. H. Chen, J. S. S. Wu, J. P. Hung, 2003.12 “The Study of Impact Characteristics of the Composite Acetabular Cups” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

34 J. C. Chang, J. S. S. Wu, J. P. Hung, 2003.12 “The Effect of Contact Interface on Dynamic Characteristic of Composite Structure” Proceedings of the 27th National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan.

35 J. S. S. Wu, T. L. Luo, J. H. Chen, J. P. Hung, 2003.12 “Finite Element Study on Dynamic Characteristics of Linear Guideway,” Proceedings of the 27th National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan.

36 J. S. S. Wu, J. H. Chen, J. P. Hung, 2002.12 “The study of mechanical behaviors and fatigue failure at the interface of cemented joint arthroplasty by finite element method,” Annual Symposium, The Biomedical Engineering Society, Kaohsiung, Taiwan.

37 J. P. Hung, J. S. S. Wu, C. H. Chung, 2002.3 “Finite Element Analysis on Fracture Mechanism for Mechanical Components under Impact Loading, Proceedings of the 7th Symposium on Fracture Science, Taiwan.

38 J. S. S. Wu, J. H. Chen, J. P. Hung, 2001.12 “The study of mechanical behavior and wear mechanism of the total hip prosthesis under impact loading by finite element simulation,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

39 J. H. Chen, J. S. S. Wu, J. P. Hung, 2001.12 “The study of anti-wear and stress distribution of sandwiched type composite acetabular cup -- finite element analysis,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

40 J. S. S Wu, J. P. Hung, T. L. Luo, J. Y. Chiu, 2001.12 “Finite Element Fractural Analysis of Recirculating Tube under Impact Loadings”, Proceedings of the 25th National Conference on Theoretical and Applied Mechanics, Taichung, Taiwan.

41 J. S. S. Wu, J. P. Hung, J. H. Chen, T.L. Luo, 2001.12 “The Study of Mechanical Behaviors and Wearing Phenomena in Total Hip Prosthesis by Numerical simulations,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

42 J. S. S. Wu, T. L. Lo, J. P. Hung, J. H. Chen, 2000.12 “Studies of the Finite Element Method on Natural Vibrational Behaviors of the Mechanism with Deflection”, Proceedings of the 24th National Conference on Theoretical and Applied Mechanics, Chungli, Taiwan.

43 J. S. S Wu, J. P. Hung, T. L. Luo, Jerry Y. Chiu, 2000.12 “Failure Analysis of Recirculating Tube of Rolled Ballscrews”, Proceedings of the 24th National Conference on Theoretical and Applied Mechanics, Chungli, Taiwan.

44 J. S. S. Wu, C. S. Hsu, J. P. Hung, J. H. Chen, T. L. Luo, 1999.12 “Finite Element Simulation for Material Wear of Composite Contact Structures,” Annual Symposium, The Biomedical Engineering Society, Tainan, Taiwan.

45 J. S. S. Wu, J. H. Chen, M. R. Shu, M. D. Poon, W. J. Chen, J. P. Hung and T.L. Luo, 1999.12 “Finite Element Analysis of Three-Dimensional Damaged Porous Media Adhered with Supporting Structures,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

46 J. H. Chen, J. S. S. Wu, W. H. Chang, C. H. Shih, T. L. Luo and J. P. Hung, 1999.12 “Measurement in 3D Acetabular Cup Migration: An Advanced Numerical Algorithm,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

47 J. S. S. Wu, J. H. Chen, Y. S. Wu, J. P. Hung, C.H. Hu, 1997.12 “Design and Stress Analysis of the Connection of Composite Structures,” Annual Symposium, The Biomedical Engineering Society, Taipei, Taiwan.

專書：

1 洪瑞斌，防爆門抗爆強度之有限元素分析, 嵩洋機械股份有限公司，2004年5月，台灣中歷。

2 洪瑞斌，雙金屬帶鋸幾何設計參數對切削性能之影響性研究，歐德實業股份有限公司，2005年5月，台灣中歷。

3 鄔詩賢，洪瑞斌，滾珠導螺桿接觸破壞機制之力學分析，上銀科技公司，2005年6月，台灣台中。

4 鄔詩賢，洪瑞斌，線性滑軌滑塊結構之最佳化設計，上銀科技公司，2005年6月，台灣台中。

5 洪瑞斌，CNC重型龍門工具機結構最佳化設計，詠勤機械公司，2006年6月，台灣台中。

6 洪瑞斌，長行程工作台進給裝置之創新設計，詠勤機械公司，2007年6月，台灣台中。

專利：

複合式髖臼杯

中華民國九十二年一月一日公告

發明專利第505710號

陳建宏;鄔詩賢;洪瑞斌

2003/01/01-2021/11/29
 

具主動型有氧肌力訓練裝之輪椅

中華民國九十四年四月十一日公告

發明專利第I230603號

陳建宏;洪瑞斌;簡松練;江炳炎;鄔詩賢

2005/04/11-2024/03/31
 

定位滑軌裝置

中華民國九十六年十一月十一日公告

新型專利第M323952號

洪瑞斌;田清奇;賴元隆

2007/12/02-2026/12/01

線性滑軌

中華民國發明專利申請案號：96127646

審查中

洪瑞斌;田清奇
 

線性導引裝置

中華民國新型專利申請案號：96212395

洪瑞斌;田清奇;謝明珠 新型形式審查核准(0970116)

線性導引裝置

中華民國 九十七年三月十一日公告新型專利

新型第 M 328336號

洪瑞斌、田清奇、謝明珠

2008/03/11-2017/07/26
 

電腦主機殼體

中華民國 九十七年六月一日公告新型專利

新型第 M 333600號

洪瑞斌、黃俊明、謝明珠

2008/06/01-2017/12/06

閱讀架

中華民國 九十七年六月一日公告新型專利

新型第 M 333101號

洪瑞斌、謝忠佑、謝明珠

2008/06/01-2017/12/06

線性導引模組

中華民國 九十八年六月一日公告新型專利

新型第 I 310431號

洪瑞斌、田清奇、賴元隆

2009/06/01-2027/04/11